Tile attachment
Each tile is secured to the deck or battens so tiles stay put in strong wind.
Tile Roofing
Tile Roof Installation Glen Ridge, NJ
A Glen Ridge tile roofer can help choose between clay and concrete, flat or curved profiles, and install the full system beneath the tile. Call (862) 357-6041 to reach a local roofer who installs tile.
Before any tile goes up, the question is whether the house can hold it. Clay and concrete tile weigh far more than shingles, so homes framed for a lighter roof often need a structural review and sometimes added framing. New homes designed for tile have the load built in from the start.
Next comes the material. Fired clay is the long lasting classic, while concrete tile is a sturdy, widely available option whose surface color softens with age. Profiles run from flat tiles that look like slate or shakes to S-shaped tile and two-piece barrel tile.
What lasts is the system under the tile. Slope matters too: tile generally needs at least 2.5 in 12, and slopes under 4 in 12 need a double layer of underlayment. Picking a durable underlayment at the start pushes the first relay decades down the road.
Many tile roof installation calls in Glen Ridge also turn up a need for tile roof replacement or roof installation.
Dealing with this in Glen Ridge, NJ right now? Call (862) 357-6041 and describe the problem to a roofer who works in Glen Ridge.
Call nowThe process
How tile roof installation works
A tile roof goes on in layers, and the tile is the last of them.
Confirm the framing
The job starts with the structure: span tables or an engineer confirm the framing, and the building permit is secured. Tile is ordered with extra for cuts, hips and future repairs.
Dry in the roof
The deck gets edge metal and underlayment, from heavy felt to synthetic or self-adhered membrane, lapped so water runs over each seam. Since this layer does the waterproofing, it is where quality matters most.
Install battens
Battens are fastened across the roof at spacing set by the tile, and on many roofs counter battens run beneath them so water can drain freely. That air space under the tile helps the roof shed heat and dry out.
Flash every penetration
Valley metal, wall and headwall flashing, chimney flashing and soft metal flashing for vent pipes go in before and during tiling. Flashing for tile is built for the depth of the tile, which is why shingle flashing details do not carry over.
Fasten each course
Courses are laid from the bottom up, starting over a raised eave or bird stop, and every tile is fastened to resist uplift. Cut tiles at hips and valleys are fastened too, since small pieces are the first to blow off.
Finish the ridge
Hips and ridges are capped, often with a mechanically fastened system that allows ridge ventilation. The roof is cleaned, broken pieces are replaced and spares are left with the owner.
What is included
What tile roof installation includes
Underlayment system
The deck is covered with underlayment suited to the slope lapped to shed water to the eaves.
Valley metal
Every penetration and wall joint is flashed so water stays on top of the underlayment.
Ridge finish
The first course gets an eave closure and the ridge gets capped with ventilation where the design calls for it.
Structural review
The framing is checked for the weight of tile especially when replacing shingles.
Related service
Barrel Tile Roof Installation Glen Ridge, NJ
A barrel tile roof uses two pieces per course, a pan tile that channels water and a curved cover tile that caps each seam. The tapered shape lets each tile nest into the one below, creating the deep rolling texture barrel roofs are known for. The open curves at the eaves and ridges must be closed so birds, wind and rain cannot get in.
For barrel tile installation on a Glen Ridge home, each cover tile is secured with nails, wire ties, clips or foam adhesive, depending on the slope and wind rules. A crew snaps lines so pans and covers stay straight from eave to ridge.
Related service
Spanish Tile Roof Installation Glen Ridge, NJ
Spanish tile usually means the S-shaped profile that combines a pan and a cover in a single piece, giving the look of barrel tile with half the pieces. Clay and concrete Spanish tile are both common, in solid and blended colors. Its interlocking side laps shed water well, but the curved ends at eaves and ridges still need closing off.
Spanish tile roof installation in Glen Ridge follows the same system as any tile roof, from structure check to underlayment, flashing and tile. Flashing around chimneys, walls and skylights has to be shaped to the S curve, often with formed metal or a flexible flashing material. With a color blend, tile is drawn from several pallets as it goes up so no area looks patchy.
Local help
Tile Roof Installation Near Me
Tile roofs in Glen Ridge go onto newer homes built for them and onto older homes where owners are switching from shingles. For older homes in Glen Ridge and nearby towns like East Orange, North Arlington, Caldwell and Clifton, the framing check is the step that decides whether tile is practical, and local wind requirements decide how each tile has to be fastened.
Searching for tile roof installation near me from Glen Ridge or East Orange, North Arlington, Caldwell and Clifton? Call (862) 357-6041 to talk to a roofer who works in your part of town.
What the local climate does to a roof
Cold winters bring snow, ice and a long stretch of freezing nights. Heat escaping from the attic melts snow on the upper roof, and the water refreezes at the colder eaves, which is how ice dams form and back water up under the shingles. Coastal storms and heavy spring rain drive water sideways into flashing, valleys and old chimneys. Most homeowners in Glen Ridge, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why fix it now
Less damage
Small roof problems caught early usually stay small repairs.
Familiar with local homes
Roofers in Glen Ridge know the roof types and weather wear common in local homes.
Know what happens next
Ask the roofer about the cause, the options and the estimate before work starts.
Common questions about tile roof installation
Can tile go over old shingles?
The old roofing is torn off before tile is installed. That lets the roofer check the sheathing, replace soft spots and lay a proper underlayment.
How long does it take to put on a tile roof?
Expect more time than a shingle job, since each tile is placed and fastened by hand over more layers. Steep pitches, many hips and valleys and a structural upgrade all add time. Once the underlayment is down, the house is protected from rain while tile goes on.
What is better, clay or concrete tile?
Both make durable roofs with different tradeoffs. Clay tile resists fading and has lasted a century or more on some older buildings. Concrete tile comes in many profiles and finishes, but it is heavier, absorbs more water and its color fades over time.
How heavy is a tile roof?
A tile roof is far heavier than a shingle roof, and concrete tile tends to weigh more than clay. A home framed for shingles needs a structural check before switching, and some need added framing. Lightweight concrete tile is an option for some homes that fall short of the load for standard tile.
What underlayment goes under a tile roof?
Options include heavy felt, synthetic sheets and peel-and-stick membranes, often doubled on lower slopes. The underlayment usually wears out long before the tile, so a durable one delays the first relay. On slopes below 4 in 12, code requires two layers.
More questions? Call (862) 357-6041
Other services that may help
Tile Roof Replacement
Tile roof replacement that strips the roof to the deck, renews the underlayment and flashing and puts sound tile back on, so the layers under the tile last as long as the tile.
Learn moreRoof Installation
New roof installation done in the right order with the right details, with ventilation and flashing planned in from the start.
Learn moreTile Roof Inspection
A close look at the tile, underlayment, flashing, valleys and attic of a clay or concrete tile roof, with a written report of what needs attention now and what can wait.
Learn moreRoof Ventilation
Fixing hot, damp or poorly vented attics with the right mix of intake and exhaust, so shingles and decking last as long as they should.
Learn more
Looking for something else?
See all roofing servicesTalk to a Glen Ridge roofer about tile roof installation
Call (862) 357-6041 for a local roofer in Glen Ridge and nearby towns.